Qos Wred - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

qos wred

qos wred
Configures a Weighted Random Early Detection (WRED) drop profile. The WRED profiler function
monitors the virtual output queues (VOQs) of the switch to provide early detection and notification of
queue congestion.
qos wred {wrp-id wrp_id | wrp-name name} [color {all | g | y | r} {min min_% | max max_% | pb pb_%
| gain gain}] [admin-state {enable | disable}]
no qos wred {wrp-id wrp_id | wrp-name name}
Syntax Definitions
wrp_id
name
all
g
y
r
min_%
max_%
pb_%
gain
admin-state enable
admin-state disable
Defaults
A default profile (wrp-1) is pre-configured with the following parameter values:
parameter
name
g min_% | max_% | pb_% | gain
y min_% | max_% | pb_% | gain
r min_% | max_% | pb_% | gain
admin-state {enable | disable}
Platforms Supported
OmniSwitch 10K
page 25-46
A WRED profile ID number. The valid range is 1–4.
An optional WRED profile name.
Configures green, yellow, and red color parameters.
Configures only green color bandwidth parameters.
Configures only yellow color bandwidth parameters.
Configures only red color bandwidth parameters.
The minimum queue threshold, in percent of queue size.
The maximum queue threshold, in percent of queue size.
The maximum drop probability, in percent of queue size. The valid
range is 0–99.
The queue gain to smooth average queue size. The valid range is 1–15.
Administratively enables the WRED profile.
Administratively disables the WRED profile.
default
wrp-1
40 | 90 | 24 | 9
30 | 90 | 30 | 9
20 | 90 | 36 | 9
enable
OmniSwitch CLI Reference Guide
QoS Commands
March 2011