Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1481

PIM Commands
Local Membership
Join/Prune State
Prune Pending Timer
Join Expiry Timer
Assert State
Assert Timer
vlan-5
UpTime
Local Membership
Join/Prune State
Prune Pending Timer
Join Expiry Timer
Assert State
Assert Timer
vlan-8
UpTime
Local Membership
Join/Prune State
Prune Pending Timer
Join Expiry Timer
Assert State
Assert Timer
vlan-9
UpTime
Local Membership
Join/Prune State
Prune Pending Timer
Join Expiry Timer
Assert State
Assert Timer
vlan-30
UpTime
Local Membership
Join/Prune State
Prune Pending Timer
Join Expiry Timer
Assert State
Assert Timer
output definitions
Group-address
RP Address
RPF Interface
Upstream Neighbor
UpTime
Pim Mode Origin
Upstream Join State
Upstream Join Timer
RPF Next Hop
OmniSwitch CLI Reference Guide
= True,
= No Info,
= 00h:00m:00s,
= 00h:00m:00s,
= No Info,
= 00h:00m:00s,
= 00h:00m:00s,
= False,
= No Info,
= 00h:00m:00s,
= 00h:00m:00s,
= No Info,
= 00h:00m:00s,
= 00h:00m:00s,
= False,
= No Info,
= 00h:00m:00s,
= 00h:00m:00s,
= No Info,
= 00h:00m:00s,
= 00h:00m:00s,
= False,
= No Info,
= 00h:00m:00s,
= 00h:00m:00s,
= No Info,
= 00h:00m:00s,
= 00h:00m:00s,
= False,
= No Info,
= 00h:00m:00s,
= 00h:00m:00s,
= No Info,
= 00h:00m:00s,
The IPv4 Multicast Group Address.
The address of the Rendezvous Point (RP) for the group.
The RPF interface towards the RP. The ifIndex is converted to the if-
name for the display.
The primary address of the neighbor on the RPF Interface that the local
router is sending periodic (*,G) join messages to.
The time since this entry was created.
The mechanism by which the PIM mode and RP for the group were
learned.
Whether the local router should join the RP tree for the group.
The time remaining before the local router next sends a periodic (*,G)
Join message on the RPF IfIndex.
The address of the RPF next hop towards the RP.
March 2011
show ip pim groute
page 23-67