Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1507

PIM Commands
output definitions
RP switchover
SPT Status
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 pim rp-switchover
ipv6 pim spt admin-state
ipv6 pim sparse admin-state
ipv6 pim interface
ip pim max-rps
ip pim probe-time
ip pim register-suppress-
timeout
MIB Objects
alaPimsmGlobalConfig
alaPimsmV6AdminStatus
alaPimKeepalivePeriod
alaPimsmMaxRPS
alaPimsmProbeTime
alaPimRegisterSuppressionTime
alaPimsmV6RPSwitchover
alaPimsmV6AdminSPTConfig
OmniSwitch CLI Reference Guide
The current status of the RP Switchover capability. RP switchover
enables or disables an RP to attempt switching to native forwarding
upon receiving the first register-encapsulated data packet. Options
include enabled and disabled. The default setting is enabled.
The current status of last hop Designated Router (DR) switching to the
Shortest Path Tree (SPT). Options include enabled and disabled.
The default setting is enabled.
Enables or disables an RP to attempt switching to native forwarding
upon receiving the first register-encapsulated packet in the IPv6
PIM domain.
Enables or disables last hop Designated Router (DR) switching to
the Shortest Path Tree (SPT). If enabled, last hop DR switching to
the SPT begins once the first multicast data packet is received.
Enables or disables the IPv6 PIM-SM (sparse mode) globally for
IPv6.
Enables IPv6 PIM and configures statistics such as hello-interval,
triggered-hello, hello-holdtime, joinprune, prune-delay, override-
interval, dr-priority, stub interface, prune limit interval, and graft
retry interval on the interface.
Configures the maximum number of C-RP routers allowed in the
PIM-SM domain.
Configures the amount of time before the Register Suppression
timer expires, at which point the Designated Router (DR) sends a
Null Register message to the Rendezvous Point (RP). This allows
the RP to refresh the Register-Stop. If the Register Suppression
timer expires, the DR will resume encapsulating packets from the
source to the RP.
Specifies the period during which a Designated Router (DR) stops
sending Register-encapsulated packets to the Rendezvous Point
(RP) after receiving a Register-Stop message.
March 2011
show ipv6 pim sparse
page 23-93