Audio And Visual Indicatoixs - Mitel Panther II 820 System Manual

Trillium Standard Practice
FIGURE 2-7 PANTHER 1032 DSSlBLF CONSOLE
3. AUDIO AND VISUAL INDICATORS
3.0 1 The operation
of any Panther telephone Set is enhanced by audio
(tones) and visual (indications) which keep the user informed of many
factors related to the call.
3.0 2
Audio indicators in the form of tones having different frequencies
and repeat rates are heard by the user during a call to indicate various events;
e.g., a tone is heard when the Executive Override feature is invoked. These
tones are identified in Table 3-l and Table 3-2. Table 3-l lists the tones
which may be heard during a intercom call and Table 3-2 lists the tones
which may be heard during a call to/from a C.O. line.
3.0 3 Visual indicators, namely the C.O. line LEDs, the INT LED and the
MIC LED, can be On, Off or flashing to indicate different status; e.g., if the
C.O. line LED lights solid, this indicates that the line is busy. Stnce flash
rates are set-dependant, the LEDs and their various flash rates are described
in each Panther Set' s respective User Guide.
Features and Services
Page 6