Night Transfer Groups; Night Transfer (Manual And Auto) - Mitel Panther II 820 System Manual

Panther II 820/1032/2064-105
NIGHT TRANSFER GROUPS
Description
In Night Transfer, all of the lines are put into one of four "Night Transfer
Line Groups", and then each of the stations are put into one of the four
"Night Transfer Station Groups". This flexible programming tells the
system which lines will ring at which stations when the system is operating
in Night Mode; for example, Group 1 may be programmed to ring certain
lines in Night Transfer mode, while Groups 2,3, and 4 are programmed to
ring other lines. This service can be used to allow more than one business
in a building to shti.e minimal night security or night reception duties.
Conditions
Lines can be put into more than one "Night Transfer Line Groups",
but each station can only be assigned to one of the four "Night Transfer
Station Groups".
Night Transfer overrides the normal ringing assignments at each Set.
This capability should be assigned to at least one station in the system.
If "Day Level Privilege" or "Low Level Privilege" Station Security is
programmed at a Set, you won' t be able to access an outgoing line from
that set without first entering a 4-digit security code.
Programming Required
l
Access Code 203 - Night Transfer Line Groups
l
Access Code 101 - Night Transfer Station Groups
l
Station Security
NIGHT TRANSFER (MANUAL AND AUTO)
Description
The Panther II system has the capability of being switched into Day or
Night mode from the Master Attendant station, either automatically or
manually.
Auto Switching -
For example, if a business has a normal routine (e.g.,
every afternoon at 5 p.m. the system goes into Night Mode, and every
morning at 8 a.m. it returns to Day Mode), the system can be set up to
automatically switch at these times.
Even with automatic switching, the Master Attendant still has the capability
of overriding the preprogrammed switching time by dialing a code (e.g., on
weekends if the business wishes to remain in Night Mode throughout the
day).
A4and Switching - If
a business does not have a normal routine, the
Panther II system can be manually switched between Day and Night mode
whenever necessary (by dialing a code from the Master Attendant station).
Conditions
None
Features
and
Services
Page 17