Tenant Types; Toll Restriction By Line - Mitel Panther II 820 System Manual

Panther II 820/1032/2064-105
.
The capability of clearing all Private Speed CalI numbers
for the system.
CAUTION: This feature should be used with extreme
discretion. The feature is not to be confused with "Set Feature Clear".
Conditions
None
OR
Programming Required
l
Access Code 070 - System Clear
TENANT TYPES
Description
This programming is done in conjunction with Flexible Ringing
Assignment, Tenant Groups and Tenant Group Assignment. It allows the
Panther II System to be programmed on a systemwide basis as one of the
following four line g-roup types:
Type A - Sets assigned to this line group can only make and
answer calls on lines within the same tenant group.
Type B - Sets assigned to this line group can make and answer
calls on lines within the same tenant group, and can also answer
incoming calls ringing in another group.
Type C - Sets assigned to this line group can make and answer
calls on lines within the same tenant group, and can also receive
calls tran.#erredfrom another group.
Type D - Sets assigned to this group have no restrictions.
Includes the features of Types
A, B,
and C.
Conditions
None
Programming Required
l
Access Code 006 - Tenant Types
TOLL RESTRICTION BY LINE
Description
This feature allows the lines on the Panther II System to be placed in one of
six possible toll restriction groups:
Class A - there are no restrictions on making calls.
.
Features and Services
Page 23