Pickup Groups; Private Lines - Mitel Panther II 820 System Manual

Panther II 820/1032/2064-105
l
If the system is behind PBXKENTREX, FLASH will be required.
l
Available choices for PAUSE ON NUMBER are: 7,8,9, and/or 0.
Programming Required
Any or all of the following:
l
Access Code 061- Type of Line
l
Access Codes 0120,0121,0122,0123 - Pause on Number
l
Access Code 013 - Pause Time
l
Access Code 005 - Flash / Cancel / Transfer
l
Access Code 011 _a Flash / Cancel Timing
l
Access Code 047 - Simultaneous / Serial Ringing (Discriminating
Ringing)
PICKUP GROUPS
Description
In order to perform the Call Pickup - Local feature on the Panther II system,
each station must be assigned to one of the ftiteen pickup groups (01 to 15).
The pickup groups should be organized so that stations in close physical
proximity to each other are placed in the same pickup group. Pickup Group
assignment allows a user to answer any incoming-or transferred call on a
line that does not appear (or ring) at their Set, as long as it appears on at
least one Set in the group.
Conditions
l
Calls will be answered in the following order of priority, when the Call
Pickup -Local code is dialed from a Set:
1. Incoming C.O. calls
2. Transfer Ringing calls
3. Incoming Intercom (internal) calls.
l
The incoming
C.O.
call of each of the above three types will be
answered frst.
Programming Required
l
Access Code 125 - Pickup Groups
PRIVATE LINES
Description
This feature allows any line to be programmed to be exclusive to any one
Set or groups of Sets.
from any other station.
The private line cannot be answered or accessed
Features
and
Services
Page
19