Station Programming; Type Of Set; Executive Override; Toll Restriction By Station - Mitel Panther II 820 System Manual

Trillium Standard Practice
'.Y
4.
Once the printout has completed, the Intercom LED will light steady,
j
signifying that the printer has stopped.
5.
Another printout may be generated by repeating Steps 2 and 3 again
(and selecting another code at Step 3).
OR E;izar
programming may be changed as outlined in the programming
.
OR Dial * to put the system back into operational mode.
STATION PROGRAMMING
2.18
The General Station Parameters, including Access Codes and Data Codes are
provided in Tables 2-l 1 to 2-14. They are:
TYPE OF SET:
Defines the type of Panther telephone set that is
connected at each station.
Preprogrammed Value - - Panther II Display Set at Station 10 and
Panther 1032 or 2064 Sets at all other stations.
EXECUTIVE OVERRIDE:
Programmed in conjunction with
EXECUTIVE OVERRIDE TONE in System Programming, this feature
determines whether each station will or will not have Executive
Override capability.
Preprogrammed Value = NO Executive Override capability at any
station.
TOLL RESTRICTION BY STATION:
Determines which of six
classes of service will be allowed at each station (Deny and Allow
Tables are provided in TOLL RESTRICTION - System Programming
section):
Class A -
there are no restrictions on making calls.
Class A' -
no restrictions except the preprogrammed entries in "Deny
Table A".
Class
B -
dialing any of the preprogrammed entries from "Deny Table
B" or dialing the number of "Digits to Deny" when Behind
PBX/Centrex, or dialing a restricted Common Speed Call number from
the "Split Restriction Table for Class B" will restrict a call. Digits
dialed in "Allow Table B" will be accepted.
Programming
Page 30