System Features; Auto Hold; Auto Line Select / Auto Intercom / Manual Select - Mitel Panther II 820 System Manual

Panther II 820/1032/2064-105
4. SYSTEM FEATURES
AUTO HOLD
Description
This feature allows you to place an external call on hold simply by pressing
a DSS key and then transfer the call by announcing to the person at the
station to pick up the line that the call is on. This capability is assigned on a
set-by-set basis. If Auto Hold is not programmed, you will have One
Touch Speed Dial capability, where speed dialing is available by pressing a
DSS key.
Conditions
l
Auto Hold is programmable for each Set.
/
Programming Required
l
Access Code 110 - One Touch Speed Dial / Auto Line Hold
AUTO LINE SELECT I AUTO INTERCOM I MANUAL
SELECT
Description
Each Set may be programmed for one of the following: Auto Line Select,
Auto Intercom, or Manual Select. The system is preprogrammed with all
Sets in Auto Intercom Mcde.
Auto Line Select
-
automatically selects an outside line (the last line used)
when the handset is lifted or the SPEAKER key is pressed. The user still
needs to press the INTERCOM key or # key to select an internal (intercom)
line.
Auto Intercom
-
automatically selects one of the internal intercom lines when
the handset is lifted or the SPEAKER key is pressed. The user still needs to
press a Line key or dial 9 to select an outside line. All Sets are
preprogrammed with this choice.
ManuaZ SeZect
-
when the handset is lifted or the SPEAKER key is pressed,
a Line key must be pressed to select an outside line, or the INTERCOM or #
key must be pressed to obtain an internal (intercom) line.
Conditions
l
Auto Line Select will be affected if Forced Account Codes or Toll
Security are enabled at a Set.
l
If
Auto Line Select and Prime Line Select are programmed, Prime Line
Select has priority.
Features
and
Services
Page 9