Setting Call Forwarding - Mitel Panther II 820 System Manual

Panther II 820/1032/2064-297
Step 12
Return to the Panther II Display Set at station 10.
Step 13 Dial *#IO15 to enter programming mode.
Step 14
Dial access code 1OOYY (Type of Set) where YY is the ONS station
number of the voice mail system or auto attendant).
Step 15
Enter 6 for a voice mail system, or 7 for an auto attendant.
Step 16
Dial * to exit programming mode.
Step 17 Unplug the power cord to the ONS unit. After waiting several
seconds reconnect the power to the ONS Unit.
Unplug the
modular cord
from the
ONS Station.
Plug it
into the
103242064
Set.
;$:j
$$
1032/2064 Set
%
11111111111111
Modular Cord
ONS
Unit
Programming Station 10
(Panther II Display Set)
To Voice
Mail System
Figure 5-1: Setting Call Forwarding
Feature Module
IV &
On Premise Station Unit
Page 29