Ons Station Features - Mitel Panther II 820 System Manual

Panther II 820/1032/2064-297
ACCESS
I I
CODE
DEFAULT
Tenant Groups 121YY No preprogrammed Tenant Groups
Zone Paging Groups
122YY
No preprogrammed Zone Groups
Prime Line Preference Groups
123YY
No preprogrammed Prime Line
Intercom Tenanting/
Preference Groups
Station Hunt Groups
Hunt Groups
124YY
I I
All station in Group 1
Pickup Groups
1
125YY
1
All Stations in Group 1
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
An ONS station has Ringing Line Pickup, regardless of whether it is programmed for a single
line set, auto attendant, or voice mail system.
These features must be programmed "0"
This feature isn' t available/applicable because
there
aren' t any DSS keys on a single line set,
auto attendant, or voice mail system.
AA = the 2-digit number of a station whose programming characteristics you would like to
copy to a block of other stations.
MM = the 2digit number of the first station in the block
NN = the 2-digit number of the last station in the block
YY = station number (10 to 73)
Table
5-4: ONS
Station Features (continuedfrom page 26)
ONS Station Features
Table 5-4 lists the programmable station features that are applicable to an ONS single-line
Refer to the
Programming Practice
of the
Panther I. System Manual
for the possible
settings available for each feature.
Setting Call Forwarding
5.02
A single-line set, voice mail system or auto attendant can forward external ringing
calls, internal ringing calls, internal DISA calls and certain transfer ringing calls to a
Panther station or another ONS station.
The ONS Unit has four station ports that you can connect to the ports of an auto attendant
or voice mail system. One possible application is to forward the calls that arrive at a busy
a voice mail or auto attendant port to another voice mail or auto attendant port. Note
however, that an ONS station is allowed only one call forwarding hop. For example, if a
call is forwarded from an ONS station port to another station that also has call forwarding
enabled, the call will not be forwarded a second time.
Feature Module IV & On Premise Station Unit
Page 27