Esc Ixy2 Select Printer Settings (Cut Options-Specifying Number Of Labels) - Brother RJ-4030 Software Manual

ESC iXy2 Select printer settings (cut options–specifying number of labels)
ASCII: ESC i
Decimal: 27
Hexadecimal: 1B
Parameters
nh1: 01h (Fixed)
nh2: 00h (Fixed)
01h≤nh3≤63h
Description
Specifies that the tape will be cut after the specified number of labels. (If the auto cut setting is ON, the
tape will be cut after the number of labels specified with this setting.)
nh3: Cuts after a specified number of labels (01h to 63h)
This command is a static command.
Example
To cut after every five labels (However, the auto cut setting must be set to ON.):
ESC i X y 2 01h 00 05h
(1Bh 69h 58h 79h 32h 01h 00h 05h)
X y 2 n1
105 88 121 50 nd1 nd2 nd3
69 58 79 32 nh1 nh2 nh3
n2 n3
- 67 -
P-touch Template 2.0 Command Reference
7. Control Command Details