Automatically Converting An Image To An Embroidery Design (Auto Punch Function) - Brother PE-DESIGN 7.0 Quick Reference Manual

Automatically Converting an Image to an
Embroidery Design (Auto Punch Function)
In this section, we are going to use the Auto Punch function to automatically create an embroidery
pattern from an image.
This procedure will go through each step of the basic operation.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 1: Importing image data into Layout & Editing
First, we need to import the image that will be converted into an embroidery pattern.
For this example, we will use the tulip image (tulip.bmp) provided with this application.
a
Start up Layout & Editing.
Click
then PE-DESIGN Ver7, then, Layout & Editing.
→ The Layout & Editing window appears.
36
Importing image data into Layout & Editing
Automatically converting the image to an embroidery pattern
Displaying a preview of the embroidery
Saving the embroidery design
Transferring the design to an original card
, then, select All Programs,
page 36
page 39
page 41
page 42
page 44