Direct Group Calling (Dgc) - AT&T System 25 User Manual

Direct Group Calling (DGC)

Your System Administrator will advise you if you have been
assigned as a member of a Direct Group Calling (DGC) group.
Calls that go to these groups are distributed among its members
for the purpose of answering incoming group associated calls.
Leaving the Group
Members may temporarily
procedures:
the following
dial tone, then press
Listen for
1
confirmation tone and hang up.
Listen for
2
to the Group
Returning
dial tone, then press
Listen for
1
confirmation tone and hang up.
Listen for
2
Display
The access code you dial to leave or return to the Group is
displayed on the screen until you hang up.
When receiving a DGC call, Screen 1 displays the DGC group
ID.
Screen 2 displays the caller identification and call-type code.
50
not receive incoming calls by use of
*
*
>522 CustServ 3
OUTSIDE
4
6
g