System Requirements; Hardware Requirements; System Key Requirement; Selecting The Alticontact Manager Platform - Altigen AltiContact Manager Version 4.6 Administration Manual

System Requirements

Hardware Requirements

AltiContact Manager hardware requirements depend on the number of
extensions (lines) and trunks your site requires. Refer to Table 4 on page 2-
12 for AltiContact Manager platform selection.

System Key Requirement

AltiContact Manager is integrated with a system key, a hardware security
device that allows the software to run ONLY when that system key is
attached to the parallel or USB port of the server that AltiContact Manager
is running on. The system key is required for initial installation, software
upgrade process, and upon system reboot.
One pre-assigned, DB-25 parallel port system key is included with every
copy of AltiContact Manager (upgrade or original). Each system key has a
unique key designated for a particular AltiGen software package - system
keys cannot be shared among systems. System keys are also available in
USB form factor. USB system keys must be special ordered.

Selecting the AltiContact Manager Platform

In order to maintain your AltiContact Manager system integrity and plan
for future site expansion, you should take into consideration the following
points before selecting the AltiContact Manager platform:
• Reliability
• Expandability
• System performance

Minimum System Requirements

The following operating systems are supported in AltiContact Manager:
• For AltiContact Manager 4.6 Server: Microsoft NT 4.0 Server with
SP6, and Windows 2000 Server with SP2 and above
AltiContact Manager Administration Manual
C
H A P T E R
2
2-1