Altigen AltiContact Manager Version 4.6 Administration Manual page 511

Table 1: CDR Call Format
Database Definition
Element
CallerPad Line's physical address for an
incoming call
CallerNum Caller phone number of an
incoming call (extension
number or off-net PSTN)
CallerName Caller name for an incoming
call (provided by CO for trunk
calls; as entered in AltiAdmin
for extension calls)
TargetType Type of line for an outgoing
call
TargetPad Physical address of line for an
outgoing call
TargetNum Target phone number of an
outgoing call (extension
number or off-net PSTN)
TargetName Target name for an outgoing
call (as entered in AltiAdmin
for extension calls)
WGNum Workgroup number for an
incoming call
Call Accounting Report Formats
Type
UCHAR
(5)
UCHAR
(41)
UCHAR
(65)
UBYTE
UCHAR
(5)
UCHAR
(41)
UCHAR
(65)
UCHAR
(8)
AltiContact Manager Administration Manual
Specification
E.g. "0004", where
"00"=slot,
"04"=channel
Always "-1-1" for WG
or virtual extension
0=None
1=Ext analog
2=Ext IP
3=Ext PHS (not used)
4=Ext virtual
5=Ext WG
11=trk analog
12=trk T1
13=trk IP
14=trk PRI
15=trk PHS (not used)
E.g. "0004," where
"00"=slot and
"04"=channel
A-3