Setup Wizard Step 1 Of 10: Lan Settings - NETGEAR UTM9S Reference Manual

ProSecure Unified Threat Management (UTM) Appliance

Setup Wizard Step 1 of 10: LAN Settings

Figure 25.
Enter the settings as explained in the following table, and then click Next to go the following
screen.
Note: In this first step, you are actually configuring the LAN settings for the
UTM's default VLAN. For more information about VLANs, see
Manage Virtual LANs and DHCP Options
Using the Setup Wizard to Provision the UTM in Your Network
on page 93.
43