Use Diagnostics Utilities - NETGEAR UTM9S Reference Manual

Managing Saved Reports
After the scheduled report has been generated and emailed, the record of the report is
displayed in the Report History section of the Report screen:
Figure 287. Report, screen 4 of 4
The Report History section shows the generated and emailed reports with their report date
and lets you perform the following actions.
• Specify the number of reports to keep. To manage the number of reports that you can
keep, enter a number from 1 to 12 in the Number of reports to keep field. The default
number is 5 reports.
• Download a report. Click Download next to a report to download the report to your
computer.
• Delete a report. Click Delete next to a report to delete the report.

Use Diagnostics Utilities

The UTM provides diagnostic tools that help you analyze traffic conditions and the status of
the network. Two sets of tools are available:
• Network diagnostic tools. These tools include a ping utility, traceroute utility, and DNS
lookup utility, and the option to display the routing table.
• Traffic diagnostic tools. These tools allow you to perform real-time, per-protocol traffic
analysis between specific source and destination addresses, and let you generate reports
on network usage in your network.
Note: For normal operation, diagnostic tools are not required.
The diagnostic tools are described in the following sections:
• Use the Network Diagnostic Tools (All UTM Models Except the UTM9S)
• Use the Network Diagnostic Tools (UTM9S)
• Use the Real-Time Traffic Diagnostics Tool (All UTM Models Except the UTM9S)
ProSecure Unified Threat Management (UTM) Appliance
Monitoring System Access and Performance
482