View The Active Pptp Users - NETGEAR UTM9S Reference Manual

Table 76. PPTP Server screen settings (continued)
Setting
Encryption
If the authentication is MSCHAP or MSCHAPv2, the PPTP server can support Microsoft Point-to-Point
Encryption (MPPE). Select one or more of the following types of MPPE:
• MPPE-40. MPPE 40-bit encryption.
• MPPE-128. MPPE 128-bit encryption. This is the most secure type of MPPE encryption.
• MPPE-stateful. Stateful MPPE encryption. This is the least secure type of MPPE encryption.
3. Click Apply to save your settings.

View the Active PPTP Users


To view the active PPTP tunnel users:
Select Monitoring > Active Users & VPNs > PPTP Active Users. The PPTP Active Users
screen displays:
Figure 185.
The List of PPTP Active Users table lists each active connection with the information that is
described in the following table.
Table 77. PPTP Active Users screen information
Item
Username
Remote IP
L2TP IP
Action
The default poll interval is 5 seconds. To change the poll interval period, enter a new value in
the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop
button.
ProSecure Unified Threat Management (UTM) Appliance
Description
Description
The name of the PPTP user that you have defined (see
page 362).
The remote client's IP address.
The IP address that is assigned by the PPTP server on the UTM9S.
This column is not applicable to PPTP.
Virtual Private Networking Using IPSec Connections
302
Configure User Accounts on