Setup Wizard Step 1 Of 10: Lan Settings - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Setup Wizard Step 1 of 10: LAN Settings

Figure 2-7
Enter the settings as explained in
screen.
Note: In this first step, you are actually configuring the LAN settings for the UTM's
default VLAN. For more information about VLANs, see
and DHCP Options" on page
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the LAN settings by selecting Network Config > LAN Settings > Edit LAN
Profile. For more information about these LAN settings, see
Options" on page
2-8
Table 2-1 on page 2-9, then click Next to go the following
4-1.
4-4.
Using the Setup Wizard to Provision the UTM in Your Network
v1.0, September 2009
"Managing Virtual LANs
"VLAN DHCP