Appendix G Default Settings And Technical Specifications; Default Settings - NETGEAR UTM9S Reference Manual

Prosecure unified threat management (utm) appliance

Hide thumbs Also See for UTM9S:

Table of Contents

Default Settings and Technical

Specifications

This appendix provides the default settings and the physical and technical specifications of the

UTM in the following sections:

Physical and Technical Specifications

Default Settings

You can use the factory default reset button located on the rear panel to reset all settings to

their factory defaults. This is called a hard reset (for more information, see

Default Settings

To perform a hard reset, press and hold the factory default reset button for approximately

8 seconds (until the Test LED blinks rapidly). The UTM returns to the factory

configuration settings that are shown in the following table.

Pressing the factory default reset button for a shorter period of time simply causes the

UTM to reboot.

The following table shows the default configuration settings for the UTM:

Table 181. UTM default configuration settings

Router login

User login URL

Administrator user name (case-sensitive)

Administrator login password (case-sensitive)

Guest user name (case-sensitive)

Guest login password (case-sensitive)

on page 405):

Default behavior

https://192.168.1.1

Revert to Factory

Troubleshooting