Setup Wizard Step 4 Of 10: Services - NETGEAR UTM9S Reference Manual

ProSecure Unified Threat Management (UTM) Appliance

Setup Wizard Step 4 of 10: Services

Figure 28.
Enter the settings as explained in the following table, and then click Next to go the following
screen.
Table 7. Setup Wizard Step 4: Services screen settings
Setting
Email
SMTP
POP3
IMAP
Using the Setup Wizard to Provision the UTM in Your Network
Description
SMTP scanning is enabled by
default on standard service port 25.
POP3 scanning is enabled by default
on standard service port 110.
IMAP scanning is enabled by default
on standard service port 143.
51
To disable any of these services, clear
the corresponding check box. You can
change the standard service port or
add another port in the corresponding
Ports to Scan field.