Hardware Features; Front Panel Utm5 And Utm10 - NETGEAR UTM9S Reference Manual

• Resource CD, including:
- Application Notes and other helpful information
- ProSafe VPN Client software (VPN01L) (depends on the UTM model)
• Service Registration Card with license key(s)
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep
the carton, including the original packing materials, in case you need to return the product for
repair.

Hardware Features

The front panel ports and LEDs, rear panel ports, and bottom labels of the UTM models are
described in the following sections:
•

Front Panel UTM5 and UTM10

• Front Panel UTM25
• Front Panel UTM50
• Front Panel UTM150
• Front Panel UTM9S and Modules
• LED Descriptions, UTM5, UTM10, UTM25, UTM50, and UTM150
• LED Descriptions, UTM9S and Modules
• Rear Panel UTM5, UTM10, and UTM25
• Rear Panel UTM50 and UTM150
• Rear Panel UTM9S
• Bottom Panels with Product Labels
Front Panel UTM5 and UTM10
Viewed from left to right, the UTM5 and UTM10 front panel contains the following ports:
• One nonfunctioning USB port. This port is included for future management
enhancements. The port is currently not operable on the UTM.
• LAN Ethernet ports. Four switched N-way automatic speed negotiating, Auto MDI/MDIX,
Gigabit Ethernet ports with RJ-45 connectors.
• WAN Ethernet port. One independent N-way automatic speed negotiating, Auto
MDI/MDIX, Gigabit Ethernet ports with RJ-45 connectors.
The front panel also contains three groups of status indicator light-emitting diodes (LEDs),
including Power and Test LEDs, LAN LEDs, and WAN LEDs, all of which are explained in
detail in Table 2 on page 27. In addition, the front panel provides some LED explanation to
the left of the LAN ports.
ProSecure Unified Threat Management (UTM) Appliance
Introduction
22