Led Descriptions, Utm9S And Modules - NETGEAR UTM9S Reference Manual

ProSecure Unified Threat Management (UTM) Appliance
Table 2. LED descriptions UTM5, UTM10, UTM25, UTM50, and UTM150 (continued)
LED Activity
LAN ports
Left LED Off
On (green)
Blinking (green)
Right LED Off
On (amber)
On (green)
DMZ LED Off
On (green)
WAN ports
Left LED Off
On (green)
Blinking (green)
Right LED Off
On (amber)
On (green)
Active LED Off
(multiple
On (green)
WAN port
models only)

LED Descriptions, UTM9S and Modules

The following table describes the function of each LED on the UTM9S and the modules.
Table 3. LED descriptions UTM9S
LED Activity
Power LED On (green)
Off
Description
The LAN port has no link.
The LAN port has detected a link with a connected Ethernet device.
Data is being transmitted or received by the LAN port.
The LAN port is operating at 10 Mbps.
The LAN port is operating at 100 Mbps.
The LAN port is operating at 1000 Mbps.
Port 4 (UTM5, UTM9S, UTM10, UTM25, and UTM150) or port 6 (UTM50) is
operating as a normal LAN port.
Port 4 (UTM5, UTM9S, UTM10, UTM25, and UTM150) or port 6 (UTM50) is
operating as a dedicated hardware DMZ port.
The WAN port has no physical link, that is, no Ethernet cable is plugged into
the UTM.
The WAN port has a valid connection with a device that provides an Internet
connection.
Data is being transmitted or received by the WAN port.
The WAN port is operating at 10 Mbps.
The WAN port is operating at 100 Mbps.
The WAN port is operating at 1000 Mbps.
The WAN port either is not enabled or has no link to the Internet.
The WAN port has a valid Internet connection.
Description
Power is supplied to the UTM.
Power is not supplied to the UTM.
Introduction
28