Connect To A Readynas And Configure Quarantine Settings (Utm9S Only); Log Storage - NETGEAR UTM9S Reference Manual

Table 101. System Date & Time screen settings (continued)
Setting
NTP Server (default or
custom)
(continued)
3. Click Apply to save your settings.
Note: If you select the default NTP servers or if you enter a custom server
FQDN, the UTM determines the IP address of the NTP server by
performing a DNS lookup. Before the UTM can perform this lookup,
you need to configure a DNS server address on the WAN ISP
Settings screen of the single WAN port models or on one of the WAN
ISP Settings screens of the multiple WAN port models (see
Configure the Internet Connection
Connect to a ReadyNAS and Configure Quarantine
Settings (UTM9S Only)
The UTM9S can quarantine questionable emails (including spam), attachments, objects, and
web files. This requires an increasing amount of storage space, which is not available on the
UTM9S. To accommodate these storage requirements, you need to connect the UTM9S to a
NETGEAR ReadyNAS and configure the quarantine settings. Without integration with a
ReasyNAS, you cannot use the quarantine options of the UTM9S.
You can select to quarantine emails, attachments, objects, and web files on one or more of
the following screens:
• Email Anti-Virus screen (see
page 179)
• Distributed Spam Analysis screen (see
• Malware Scan screen (see
• FTP screen (Configure FTP Scans

Log Storage

After you have integrated a ReadyNAS with the UTM9S—whether or not you have configured
the quarantine settings—all logs that are normally stored on the UTM9S are now stored on
the ReadyNAS. That is, all logs that you can specify on the Email and Syslog screen (see
Configure and Activate System, Email, and Syslog Logs
ProSecure Unified Threat Management (UTM) Appliance
Description
Server 1 Name / IP Address
Server 2 Name / IP Address
Customize Email Antivirus and Notification Settings
Configure Web Malware Scans
on page 219)
Network and System Management
Enter the IP address or host name of the primary
NTP server.
Enter the IP address or host name of the backup
NTP server.
on page 71.)
Configure Distributed Spam Analysis
on page 197)
on page 423) and that you can query
414
Manually
on
on page 191)