Connect To A Readynas - NETGEAR UTM9S Reference Manual

on the Log Query screen and view onscreen (see
on page 467) are stored on the ReadyNAS. However, after you have integrated a ReadyNAS
with the UTM9S, logs can no longer be sent to an email address (see the Email Logs to
Administrator section on the Email and Syslog screen). If you have enabled a syslog server
on the Email and Syslog screen, logs are still send to the syslog server.
WARNING!
When you integrate a ReadyNAS with the UTM9S, the logs that
were saved on the UTM9S are deleted.
Note: If the network connection to the ReadyNAS goes down, the
quarantine logs are no longer saved, and all other logs are saved on
the UTM9S. In this situation, the ReadyNAS and quarantine status
fields show OFF on the System Status screen (see
Status Screen
back up, the quarantine logs and all other logs are saved on the
ReadyNAS once again, but the logs that were saved on the UTM9S
are deleted.

Connect to a ReadyNAS


To connect to the ReadyNAS on the UTM9S:
1. Select Administration > ReadyNAS Integration. The ReadyNAS Integration screen
displays:
Figure 249.
2. To connect to the ReadyNAS, select the Yes radio button.
ProSecure Unified Threat Management (UTM) Appliance
on page 440). When the network connection comes
Network and System Management
Query the Quarantine Logs (UTM9S Only)
View the System
415