System Log Messages; System Startup; Reboot; Service Logs - NETGEAR UTM9S Reference Manual

System Log Messages

This section describes log messages that belong to one of the following categories:
• Logs that are generated by traffic that is meant for the UTM.
• Logs that are generated by traffic that is routed or forwarded through the UTM.
• Logs that are generated by system daemons: the NTP daemon, the WAN daemon, and
others daemons.

System Startup

This section describes log messages generated during system startup.
Table 150. System logs: system startup
Message
Explanation
Recommended Action

Reboot

This section describes log messages generated during a system reboot.
Table 151. System logs: reboot
Message
Explanation
Recommended Action

Service Logs

This section describes log messages generated during firmware updates and other
service-related events.
Table 152. System logs: service
Message
Explanation
Recommended Action
ProSecure Unified Threat Management (UTM) Appliance
Jan 1 15:22:28 [UTM] [ledTog] [SYSTEM START-UP] System Started
Logs that are generated when the system is started.
None.
Nov 25 19:42:57 [UTM] [reboot] Rebooting in 3 seconds
Logs that are generated when the system is rebooted from the web management
interface.
None.
2008-12-31 23:59:48 error Firmware update failed! Either the subscription is not yet
registered, or has expired.
Logs that are generated when a firmware update fails or succeeds. The message
shows the date and time, and the event.
Note: The service log includes miscellaneous service messages.
None.
System Logs and Error Messages
583