Technical Support; Revision History - NETGEAR UTM9S Reference Manual

ProSecure Unified Threat Management (UTM) Appliance
© 2009–2011 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means without the written permission of NETGEAR, Inc.

Technical Support

Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or
for more information about the topics covered in this manual, visit the Support website at visit us at
http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/app/answers/detail/a_id/984.
Product Updates
Product updates are available on the NETGEAR website at
http://kb.netgear.com/app/home.
ProSecure Forum
Go to http://prosecure.netgear.com/community/forum.php
become part of the ProSecure community.
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, ProSecure, Smart Wizard, Auto Uplink, X-RAID2, and
NeoTV are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista
are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or
trademarks of their respective holders.
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes
to the products described in this document without notice. NETGEAR does not assume any liability that may occur
due to the use, or application of, the product(s) or circuit layout(s) described herein.

Revision History

Publication Version
Part Number
202-10780-01 1.0
Publish Date Comments
September 2011 • Addition of the UTM9S with the following major new features:
- xDSL module (see
Manually Configuring Internet and WAN
- Wireless module (see
Appendix B, Wireless Module for the
- ReadyNAS integration, quarantine options, and quarantine
logs (see
Quarantine Settings (UTM9S
Logs (UTM9S
Integration
- PPTP server (see
Only))
- L2TP server (see
Only))
• Update of the VPN client sections with the new VPN client (see
Chapter 7, Virtual Private Networking Using IPSec
http://prosecure.netgear.com
for information about the ProSecure forum and to
Chapter 1, Introduction
Chapter 1, Introduction
Connect to a ReadyNAS and Configure
Only),
Only), and Appendix D, ReadyNAS
Configure the PPTP Server (UTM9S
Configure the L2TP Server (UTM9S
2
or
and Chapter 3,
Settings)
and
UTM9S)
Query the Quarantine
Connections)