System Management; Change Passwords And Administrator And Guest Settings - NETGEAR UTM9S Reference Manual

System Management

System management tasks are described in the following sections:
•

Change Passwords and Administrator and Guest Settings

• Configure Remote Management Access
• Use a Simple Network Management Protocol Manager
• Manage the Configuration File
• Update the Firmware
• Update the Scan Signatures and Scan Engine Firmware
• Configure Date and Time Service
Change Passwords and Administrator and Guest Settings
The default administrator and default guest passwords for the web management interface are
both password. NETGEAR recommends that you change the password for the administrator
account to a more secure password, and that you configure a separate secure password for
the guest account.

To modify the administrator and guest user account settings, including the password:
1. Select Users > Users. The Users screen displays. (The following figure shows the
UTM's default users—admin and guest—and, as an example, several other users in the
List of Users table.)
Figure 239.
2. In the Action column of the List of Users table, click the Edit table button for the user with
the name admin. The Edit User screen displays:
ProSecure Unified Threat Management (UTM) Appliance
Network and System Management
397