Set Dmz Wan Rules - NETGEAR UTM9S Reference Manual


To create a new inbound LAN WAN service rule:
1. In the LAN WAN Rules screen, click the Add table button under the Inbound Services
table. The Add LAN WAN Inbound Service screen displays:
Figure 67.
2. Enter the settings as explained in
3. Click Apply to save your changes. The new rule is now added to the Inbound Services
table.

Set DMZ WAN Rules

The firewall rules for traffic between the DMZ and the Internet are configured on the DMZ
WAN Rules screen. The default outbound policy is to block all traffic from and to the Internet.
You can then apply firewall rules to allow specific types of traffic either going out from the
DMZ to the Internet (outbound) or coming in from the Internet to the DMZ (inbound).
There is no drop-down list that lets you set the default outbound policy as there is on the LAN
WAN Rules screen. You can change the default outbound policy by enabling all outbound
traffic and then blocking only specific services from passing through the UTM. You do so by
adding outbound services rules (see
ProSecure Unified Threat Management (UTM) Appliance
Table 28
DMZ WAN Outbound Service Rules
Firewall Protection
on page 127.
133
on page 134).