View The Pptp And L2Tp Server Status (Utm9S Only) - NETGEAR UTM9S Reference Manual

ProSecure Unified Threat Management (UTM) Appliance
Figure 270.
The active user's user name, group, and IP address are listed in the table with a time stamp
indicating the time and date that the user connected.
To disconnect an active user, click the Disconnect table button to the right of the user's table
entry.

View the PPTP and L2TP Server Status (UTM9S Only)

To view the active PPTP tunnel users, select Monitoring > Active Users & VPNs > PPTP
Active Users. The PPTP Active Users screen displays:
The List of PPTP Active Users table lists each active connection with the information that is
described in the following table.
Table 119. PPTP Active Users screen information
Item Description
Username The name of the PPTP user that you have defined (see
page 362).
Remote IP The remote client's IP address.
L2TP IP The IP address that is assigned by the PPTP server on the UTM9S.
Action This column is not applicable to PPTP.
The default poll interval is 5 seconds. To change the poll interval period, enter a new value in
the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop
button.
Monitoring System Access and Performance
453
Configure User Accounts on