Report Filtering Options - NETGEAR UTM9S Reference Manual

The UTM provides preconfigured report templates. As an option, you can apply filtering
options to narrow down and specify the following options:
• The period that is covered in the report
• The categories and domains to be included in the report
• The number of entries per report (for example, how many entries—from 1 to 10—are
included in reports that show the "top number.")
• The chart type of the report (horizontal bar, pie, or vertical bar)
Because of the nature of the Report screen, it is divided and presented in this manual in three
figures that are explained in the following sections:
•

Report Filtering Options

• Use Report Templates and View Reports Onscreen
• Schedule, Email, and Manage Reports
Report Filtering Options
Before you generate reports to view onscreen or schedule reports to be emailed, you might
want to configure filtering options. If you do not configure filtering options, the default settings
apply. The report default settings are:
• Time range. The last 24 hours.
• Destination. None.
• Count. 10.
• Chart Type. Vertical bar.

To configure filtering options:
1. Select Monitoring > Logs & Reports > Report. The Report screen displays. (The
following figure shows only the sections with the preconfigured report templates.)
Figure 284. Report, screen 1 of 4
ProSecure Unified Threat Management (UTM) Appliance
Monitoring System Access and Performance
474