Installing the router
WARNING!
To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs.
IMPORTANT:
The barcode on the router chassis contains product information that must be provided to HP Support
•
before you return a faulty router for service.
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
•
the chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence.
Installation prerequisites
You have read
"Preparing for
•
All requirements in
•
Installation flowchart
You can install the router on a workbench or on a wall. Select an installation method according to the
installation environment, and follow the installation flowchart shown in
installation" carefully.
"Preparing for
installation" are met.
9
Figure
1.