Paper feed components
Tray 1 feed roller and nudger roller
1.
Remove Tray 1.
2.
Release the locking tab on the left end of the feed rollers.
3.
Slide the feed rollers to the left and remove. Note the clutch on the shaft
behind the upper roller. Note the torque limiter on the shaft behind the
lower feed roller.
4.
Release the locking tab on the left end of the nudger roller.
5.
Slide the nudger roller to the left and remove. Note the clutch on the
shaft behind the roller.
Clutches
Nudger
Roller
Lift
Locking Tab
Removing the feed rollers and nudger roller
Reverse these steps to install the feed rollers and nudger roller.
116
Phaser 2135 Color Printer
Torque Limiter
Feed Roller
0725-30