Bandwidth-Limit; Mirror; Figure 118 Broadcast-Limit Command Example; Figure 119 Bandwidth-Limit Command Example - ZyXEL Communications ES-2024A User Manual

An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set the broadband packet traffic the interface receives per second.

Figure 118 broadcast-limit Command Example

ras(config)# interface port-channel 1
ras(config-interface)# bmstorm-limit
ras(config-interface)# bmstorm-limit 21

28.10.3 bandwidth-limit

Syntax:
where
<Mbps>
An example is shown next.
• Enable port one for configuration.
• Enable bandwidth control.
• Set the outgoing traffic bandwidth limit to 70Kbps.
• Set the incoming traffic bandwidth limit to 90Kbps.

Figure 119 bandwidth-limit Command Example

ras(config)# interface port-channel 1
ras(config-interface)# bandwidth-limit
ras(config-interface)# bandwidth-limit egress 70
ras(config-interface)# bandwidth-limit ingress 90

28.10.4 mirror

Syntax:
Chapter 28 Command Examples
bandwidth-limit
bandwidth-limit egress <Kbps>
bandwidth-limit ingress <Kbps>
Enables bandwidth control on the switch.
Sets the maximum bandwidth allowed for outgoing traffic (egress) or
incoming traffic (ingress) on the switch.
mirror
mirror dir <ingress|egress|both>
ES-2024A User's Guide
177