Mvr Commands; Table 99 Command Summary: Mvr Commands - ZyXEL Communications GS-4012F/4024 User Manual

Table 98 Command Summary: config-vlan Commands (continued)
COMMAND
normal <port-
list>
untagged <port-
list>

40.10 mvr Commands

The following table lists the

Table 99 Command Summary: mvr Commands

COMMAND
mvr <1-4094>
exit
group <name-str>
start-address
<ip> end-address
<ip>
inactive
mode <dynamic|
compatible>
name <name-str>
no
Chapter 40 Introducing the Commands
forbidden <port-
list>
inactive
ip address <ip-
address> <mask>
ip address
default-gateway
untagged <port-
list>
commands in configuration mode.
mvr
group
group <name-str>
inactive
receiver-port
<port-list>
GS-4012F/4024 User's Guide
DESCRIPTION
Sets forbidden port(s) to normal
port(s).
Enables the specified VLAN.
Deletes the IP address and subnet
mask from this VLAN.
Deletes the default gateway from this
VLAN.
Specifies the port(s) you want to tag all
outgoing frames transmitted with this
VLAN Group ID.
Specifies the port(s) to dynamically join
this VLAN group using GVRP
Specifies the port(s) you don't want to
tag all outgoing frames transmitted
with this VLAN Group ID.
DESCRIPTION
Enters the MVR (Multicast VLAN
Registration) configuration mode.
Exist from the MVR configuration
mode.
Sets the multicast group range for the
MVR.
Disables MVR settings.
Sets the MVR mode (dynamic or
compatible).
Sets the MVR name for identification
purposes.
Disables all MVR group settings.
Disables the specified MVR group
setting.
Enables MVR.
Disables the receiver port(s).An MVR
receiver port can only receive multicast
traffic in a multicast VLAN.
266