Global Dhcp Relay Configuration Example; Configuring Dhcp Vlan Settings; Figure 90 Global Dhcp Relay Network Example; Figure 91 Dhcp Relay Configuration Example - ZyXEL Communications Dimension GS-2024 User Manual

Chapter 23 DHCP

23.3.3 Global DHCP Relay Configuration Example

The follow figure shows a network example where the Switch is used to relay DHCP requests
for the VLAN1 and VLAN2 domains. There is only one DHCP server that services the DHCP
clients in both domains.

Figure 90 Global DHCP Relay Network Example

DHCP Server:
192.168.1.100
Configure the DHCP Relay screen as shown. Make sure you select the Option 82 check box
to set the Switch to send additional information (such as the VLAN ID) together with the
DHCP requests to the DHCP server. This allows the DHCP server to assign the appropriate IP
address according to the VLAN ID.

Figure 91 DHCP Relay Configuration Example

23.4 Configuring DHCP VLAN Settings

Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP
clients. Click IP Application > DHCP in the navigation panel, then click the VLAN link In
the DHCP Status screen that displays.
170
VLAN1
VLAN2
example
GS-2024 User's Guide