Dscp-To-Ieee802.1P Priority Mapping; Configuring Dscp Settings; Figure 93 Diffserv: Dscp Setting; Table 67 Default Dscp-Ieee802.1P Mapping - ZyXEL Communications GS-4012F/4024 User Manual

Table 66 DiffServ (continued)
LABEL
Apply
Cancel

29.3 DSCP-to-IEEE802.1p Priority Mapping

You can configure the DSCP to IEEE802.1p mapping to allow the switch to prioritize all
traffic based on the incoming DSCP value according to the DiffServ to IEEE802.1p mapping
table.
The following table shows the default DSCP-to-IEEE802.1P mapping.

Table 67 Default DSCP-IEEE802.1p Mapping

DSCP VALUE 0 – 7
IEEE802.1P

29.3.1 Configuring DSCP Settings

To change the DSCP-IEEE 802.1p mapping click the DSCP Setting link in the DiffServ
screen to display the screen as shown next.

Figure 93 DiffServ: DSCP Setting

The following table describes the labels in this screen.
Chapter 29 Differentiated Services
DESCRIPTION
Click Apply to save the changes.
Click Cancel to start configuring this screen again.
8 – 15 16 – 23
0 1 2
GS-4012F/4024 User's Guide
24 – 31 32 – 39 40 – 47
3 4 5
48 – 55 56 – 63
6 7
182