Installing And Removing The Server Board; Removing The Server Board; Figure 62. Removing The Power Supply Module; Figure 63. Installing The Power Supply Module - Intel Server System R1000GZ Service Manual

2. Do one of the following:
- Insert the power supply module into the power supply cage and push all the way until it
clicks into place (see letter "B").
- If no power supply is to be installed, install the filler panel into the power supply cage.

Installing and Removing the Server Board

Removing the Server Board

1. Disconnect all cables from the server board.
2. Remove the four screws to release the air duct side wall (see letter "A").
3. Lift the air duct side wall straight up to remove from the server board (see letter "B").
®®
Intel Server System R1000GZ/GL Service Guide

Figure 62. Removing the power supply module

Figure 63. Installing the power supply module

Figure 64. Installing the filler panel

Hardware Installations and Upgrades
37