Table of Contents
Advertisement
C7600_SSC600 Messages
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %C7600_SSC600-3-DPTX_QDR: Error clearing QDR queue [dec].
Explanation
Recommended Action
or in the system log. Research and attempt to resolve the issue using the tools and utilities provided
at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %C7600_SSC600-3-SINGLE_SPA_MODE: Module will use only bay [dec]. Bay
[dec] is shut.
Explanation
Recommended Action
Error Message %C7600_SSC600-3-SSC_BAY_SHUT: Bay [dec] is shutdown because
7600-SSC-400 is in single-spa-mode
Explanation
Recommended Action
Error Message %C7600_SSC600-3-SW_ERROR: NULL
Explanation
arise under normal operation.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
2-46
One of the QDR queues did not clear completely.
If this message recurs, copy the message exactly as it appears on the console
The 7600-SSC-400 is in single-SPA mode.
This message is informational. No action is required.
Specified bay is shut down. In single-SPA mode, only one bay is active.
Refer to IPSEC SPA documentation for information about single-SPA mode.
This condition arises when there is a problem in internal software coding; it should not
Copy the message exactly as it appears on the console or in the system log.
Chapter 2
Messages and Recovery Procedures
OL-11469-02
Advertisement
Table of Contents
