Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %SIP600-3-STATID_INCONSISTENCY: PXF([dec]):Inconsistent stats
id([hex]) [int] packets dropped.
Explanation
or more packets have been dropped, but no corresponding packet count has been reported.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %SIP600-3-UNEXPECTED_GLOBAL_INT: Unexpected Global Interrupt: [chars]
Explanation
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %SIP600-3-UNSUPPORTED_LABEL_RANGE: The maximum label range configured
for this system exceeds
the [int] limit supported by the OSM module.
Explanation
maximum label range limit is specified in the message.
Recommended Action
command.
OL-11469-02
A WAN line card has received inconsistent statistics from PXF. PXF reported that one
Copy the message exactly as it appears on the console or in the system log.
An unexpected global interrupt has occurred.
Copy the message exactly as it appears on the console or in the system log.
The MPLS label range that was configured for this system is not supported. The
Change the maximum MPLS label range by entering the mpls label range
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
SIP600 Messages
2-229
Advertisement
Table of Contents
