Table of Contents
Advertisement
CWTLC Messages
Error Message %CWTLC-3-TMTRIE_ALLOC_FAILED: Failed to allocate toaster mtrie nodes.
Explanation
WAN OSM component.
Recommended Action
WAN OSM to a higher version.
Error Message %CWTLC-3-UNSUPPORTED_LABEL_RANGE: The maximum label range configured
for this system exceeds
the [int] limit supported by the OSM module.
Explanation
range limit is specified in the message.
Recommended Action
command.
Error Message %CWTLC-3-VTMS: [chars]
Explanation
error message text.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %CWTLC-3-VTMSQ_NOTIDLE: Queue not idle when modifying Q([hex])
Explanation
configuration, but packets were still going through the queue. There is generally no traffic in the
queue when the queue is being modified.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
2-92
The system encountered an error while it was attempting to allocate memory from a
Reduce the number of routes associated with a VRF identifier or upgrade the
The MPLS label range configured for this system is not supported. The maximum label
Change the maximum MPLS label range by entering the mpls label range
The OSM could not schedule the wheel entry. The reason for the error is specified in the
Copy the message exactly as it appears on the console or in the system log.
The VTMS queue was in the process of being modified for a change in QoS
Copy the message exactly as it appears on the console or in the system log.
Chapter 2
Messages and Recovery Procedures
OL-11469-02
Advertisement
Table of Contents
