Table of Contents
Advertisement
L3MM Messages
Error Message %L3MM-4-MALLOC_FAIL: Memory allocation failure [chars]
Explanation
respond to an event.
Recommended Action
Error Message %L3MM-4-MN_IPDB_ADD: Failed to add MN to MN DB { MN: [enet],
[IP_address]}
Explanation
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %L3MM-4-MN_IPDB_DEL: Failed to delete MN from IP DB { MN: [enet],
[IP_address]}
Explanation
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %L3MM-4-MN_MACDB_ADD: Failed to add MN to MAC DB { MN: [enet], AP:
[IP_address] }
Explanation
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
2-160
The L3MM failed to allocate memory that was needed to perform an operation or to
Increase the memory on the RP of the supervisor engine.
The L3MM failed to add the entry for the specified MN into the MN IP database.
Copy the message exactly as it appears on the console or in the system log.
The L3MM failed to delete the entry for the specified MN from the MN IP database.
Copy the message exactly as it appears on the console or in the system log.
The L3MM failed to add the entry for the specified MN into the MN MAC database.
Copy the message exactly as it appears on the console or in the system log.
Chapter 2
Messages and Recovery Procedures
OL-11469-02
Advertisement
Table of Contents
