Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message %SBFIFO-1-IDBTYPE_UNK: Unknown IDBTYPE while starting driver
Explanation
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %SBFIFO-1-INITFAIL_NOMEM: [chars], initialization failed, no buffer
memory
Explanation
more packet memory.
Recommended Action
as it appears on the console or in the system log. Research and attempt to resolve the issue using the
tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and
utilities will supply clarifying information. Search for resolved software issues using the Bug
Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case
with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message %SBFIFO-1-MODE_INVALID: Unknown or invalid chip mode (MII/TBI)
Explanation
mode).
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
OL-11469-02
The IDBTYPE in the instance structure of the interface is undefined for this driver.
Copy the message exactly as it appears on the console or in the system log.
The Ethernet port initialization failed due to insufficient memory. The router requires
Consider a system upgrade. If this message recurs, copy the message exactly
The driver subblock contains an invalid or undefined chip operating mode (MII or TBI
Copy the message exactly as it appears on the console or in the system log.
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
SBFIFO Messages
2-217
Advertisement
Table of Contents
