Table of Contents
Advertisement
SIP600_QOS Messages
Error Message %SIP600_QOS-3-NOTFOUND: SIP-600 Software Element Not Found - [chars]:
[chars] [dec]
Explanation
Recommended Action
persists, copy the message exactly as it appears on the console or in the system log. Research and
attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With
some messages, these tools and utilities will supply clarifying information. Search for resolved
software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still
require assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message %SIP600_QOS-3-NOTSUP: SIP-600 Feature Not Supported - [chars]: [chars]
[chars]
Explanation
Recommended Action
feature.
Error Message %SIP600_QOS-3-QEXCEEDWREDGRP: SIP-600 Exceeded WRED limit groups for
queue [dec]
Explanation
hardware queue. This condition is the result of attempting to configure a QoS action.
Recommended Action
be configured. The user-configuration action has caused the limits to go beyond the system limit. As
a result, WRED is not configured on that queue. The following configuration illustrates three unique
sets of WRED min/max limits:
random-detect
random-detect prec 0 1000 2000 1
random-detect prec 1 1000 2000 1
random-detect prec 2 2000 3000 1
random-detect prec 3 2000 3000 1
random-detect prec 4 1000 2000 1
random-detect prec 5 3000 4000 1
random-detect prec 6 2000 3000 1
random-detect prec 7 3000 4000 1
Update your configuration so that the WRED configuration is within the limits, and reapply the
service policy.
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
2-236
The SIP 600 client could not locate a required software element.
Reload the Cisco IOS image on the affected line card or platform. If the error
The SIP 600 does not support the specified feature.
Change the SIP 600 configuration so that it does not include the specified
The SIP 600 depleted available resources when configuring WRED on the specified
For each queue, there is a limited number of unique WRED limits sets that can
Chapter 2
Messages and Recovery Procedures
OL-11469-02
Advertisement
Table of Contents
