Cisco III - Supervisor Engine III Message Manual page 110

CWAN_RP Messages
CWAN_RP-6
Error Message %CWAN_RP-6-ADF_FILE: Slot [int]: Using VPN-SM Upgrade File: "[chars]"
Error Message %CWAN_RP-6-AUX_FILE: Slot [int]: Found VPN-SM Firmware in File:
"[chars]"
Error Message %CWAN_RP-6-LCLOG_MSG : slot [dec]/[dec]: [chars]
Error Message %CWAN_RP-6-OVERRIDE: Slot [int]: ...Overriding Intrinsic VPN-SM
Firmware.
Error Message %CWAN_RP-6-UPGRADE_COMPLETE: Slot [int]: ROMMON upgrade complete.
Reset the card for the changes to take effect.
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
2-80
The system is booting the specified upgrade image for VPN Services Module.
Explanation
No action is required.
Recommended Action
The file specified in the message was found and will be loaded instead of the bundled
Explanation
image by the VPN Services Module.
Recommended Action No action is required.
An error has occurred on a module. The slot and CPU number are indicated after the
Explanation
CWAN_RP-6-LCLOG_MSG text. The error message that appears after the slot number is the
original message from the module.
Follow any instructions provided in the error message text. If no instructions
Recommended Action
are provided, copy the message exactly as it appears on the console or in the system log. Research
and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac.
With some messages, these tools and utilities will supply clarifying information. Search for resolved
software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still
require assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
Explanation The specified image will be used instead of the bundled image.
No action is required.
Recommended Action
The ROMMON upgrade has completed successfully. The module must be reloaded for
Explanation
the changes to take effect.
No action is required.
Recommended Action
Chapter 2 Messages and Recovery Procedures
OL-11469-02