Table of Contents
Advertisement
CWTLC Messages
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %CWTLC-3-NO_STATID: PXF([dec]): no stat_id is available for statistics
collection
Explanation
available for further statistics collection.
Recommended Action
warrant, copy the message exactly as it appears on the console or in the system log. Research and
attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With
some messages, these tools and utilities will supply clarifying information. Search for resolved
software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still
require assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message %CWTLC-3-OLDIOFPGA: Upgrade your I/O FPGA
Explanation
Recommended Action
software.
Error Message %CWTLC-3-PLIM_TX: [chars]
Explanation
attempt to recover from the error.
Recommended Action
copy the message exactly as it appears on the console or in the system log. Research and attempt to
resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some
messages, these tools and utilities will supply clarifying information. Search for resolved software
issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require
assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
2-90
The OSM has used up all resources for statistics collection. No additional resources are
Reduce the number of features configured on the specified PXF. If conditions
The OSM has an older release of the I/O FPGA software.
Contact your Cisco technical support representative to upgrade the I/O FPGA
The OSM encountered an FPGA error that caused a sequence error. The module will
If the system recovers, no action is required. If the system does not recover,
Chapter 2
Messages and Recovery Procedures
OL-11469-02
Advertisement
Table of Contents
