Cisco III - Supervisor Engine III Message Manual page 37

Cisco ios system message guide

Table of Contents

Chapter 2

Messages and Recovery Procedures

Error Message %ATMSPA-3-FATAL_ERROR: occurred on [chars]. Resetting SPA

Explanation

be either a single occurrence of an event or multiple occurrences within a period of time. The

message text on the console or in the system log provides more information about the specific nature

of the error.

Recommended Action

the console or in the system log. Research and attempt to resolve the issue using the tools and

utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will

supply clarifying information. Search for resolved software issues using the Bug Toolkit at

http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the

Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or

contact your Cisco technical support representative and provide the representative with the

information you have gathered. Attach the following information to your case in nonzipped,

plain-text (.txt) format: the output of the show logging and show tech-support commands and your

pertinent troubleshooting logs.

Error Message %ATMSPA-3-FPD_VER_DEPENDENCY_NOTE: Cannot perform the requested FPD

update operation because [chars] in subslot [int]/[int] has incompatible HW

version [int].[int] with FPD image version [dec].[dec] for FPD ID [dec]. Only image

version greater than [int].[int] can be used in the update operation of [chars]

with HW version greater than [int].[int].

Explanation

or package is not compatible with the hardware version of the target card.

Recommended Action

Research and attempt to resolve the issue using the tools and utilities provided at

http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying