Table of Contents
Advertisement
SW_VLAN Messages
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %SW_VLAN-4-VTP_DB_INVALID_VLANID: Invalid VLAN ID [dec] found in VTP
database download
Explanation
configuration file. This condition indicates that the VTP configuration file in NVRAM is corrupted.
[dec] is the VLAN ID.
Recommended Action
investigate the condition. Collect the output from the show vtp status command and the show vlan
command. Contact your Cisco technical support representative with the information that you have
collected.
Error Message %SW_VLAN-4-VTP_SEM_BUSY: VTP semaphore is unavailable for function
[chars]. Semaphore locked by [chars]
Explanation
Recommended Action
it appears on the console or in the system log. Research and attempt to resolve the issue using the
tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and
utilities will supply clarifying information. Search for resolved software issues using the Bug
Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case
with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
2-252
An invalid VLAN ID was detected in the VTP database during the download of the VTP
Save a copy of the vlan.dat file that includes the invalid VLAN ID to help
The VTP database is currently locked by another task and is not available.
Retry the operation later. If this condition recurs, copy the message exactly as
Chapter 2
Messages and Recovery Procedures
OL-11469-02
Advertisement
Table of Contents
