Cisco III - Supervisor Engine III Message Manual page 32

ACE Messages
ACE-6
Error Message %ACE-6-SWITCHOVER: VPN-SM switchover: [dec]/[dec] has been [chars]
[dec]/[dec]
Error Message %ACE-6-UNEXP_INBOUND_IPSEC: [chars]: received unexpected IPsec packet:
src IP: [IP_address]; dst IP: [IP_address]; (count=[dec])
Error Message %ACE-6-UNEXP_OUTBOUND_IPSEC: [chars]: received unexpected IPsec
packet: src IP: [IP_address]; dst IP: [IP_address]; firsthop/lasthop =
[chars]/[chars] (count=[dec])
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
2-2
messages, these tools and utilities will supply clarifying information. Search for resolved software
issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require
assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
A module-to-module switchover has occurred. System performance is not affected.
Explanation
Recommended Action No action is required.
Explanation An IPsec packet was unexpectedly forwarded to the RP.
If this message appears when booting the router and enabling the hardware
Recommended Action
crypto accelerator, then this message is normal and can be safely ignored. Otherwise, copy the error
message exactly as it appears on the console or in the system log, and report it to your Cisco
technical support representative.
An IPsec packet was unexpectedly forwarded to the RP.
Explanation
If this message appears when booting the router and enabling the hardware
Recommended Action
crypto accelerator, then this message is normal and can be safely ignored. Otherwise, copy the error
message exactly as it appears on the console or in the system log, and report it to your Cisco
technical support representative.
Chapter 2 Messages and Recovery Procedures
OL-11469-02